ABOUT MODA:

MODA is an Italian brand with a reputation for creating unique bathroom ware specialling in Baths and Basins.

 

ABOUT MODA CAST STONE:

As the ultimate statement in quality and style, made from 100% PORCELITE®, a blend of limestone and high performance resins. Pure white, each item is individually hand-finished by craftsmen.

PORCELITE® is made from finely ground limestone mixed with resin. As the stone-rich alternative to both cast iron and acrylic it is 100% one piece, hand finished and packed with naturally desirable properties:

 

Warm to Touch

Due to the quality of the PORCELITE® material it has high insulation properties and is warm to the touch

 

Beautiful Hand Finish

The Limestone delivers a naturally pure white, Matt or Gloss finish, featuring excellent stain resistance, each product is hand finished by our superb technicians

 

Strong

This raw material has special needle-like particles formed by the rock undergoing superheating. When mixed with resins these bond together to create an incredibly strong web. As well as being naturally white and naturally harder than acrylic, this makes PORCELITE® incredibly strong and ensures no creaking or flexing of the bath

 

Renewable

Easy clean solid surface – as the material is solid all the way through, internal scratches simply polish out

 

Unique

Hand finished interior – exterior can be painted or personalized after purchase

 

Lasting

10 year guarantee, The warranty is valid from purchase date against defect in the materials and or workmanship and will replace or repair the defective product subject to the following conditions: Our obligation is to the original purchaser and cannot be transferred. Our warranty is offered on all products that have been used in the manner they were intended, and does not apply to any products that have been misused or abused in any way. Products must be installed and cared for in line with our fixing instructions and local water bylaws.

 

How do I clean my PORCELITE® product?

For light daily use, rinse with clean warm water. If any marks are not being removed with this method, then we recommend a non-abrasive bathroom or kitchen household cleaner. Bleach-based cleaning products are compatible with PORCELITE®, although for environmental reasons we do not recommend them. Abrasives will cause the disappearance of the glossy look over a long period. Should you need to clean the bath with an abrasive cleaner, as may be required after heavy use, polishing with a car polish or household metal polish will restore the bath’s lustre.

 

What do I do if I scratch my bath and it leaves a mark?

PORCELITE® is scratch resistant. However if any scratches do occur in extreme conditions, such as installation, these can be removed by rubbing with a 800# sand paper then with a wet and dry 1600# once the scratch has been removed you can use a car polish to polish the surface to restore the finish. For best results limit sanding to the smallest possible area around the scratch.

It may be possible to polish very fine scratches away without using abrasive papers: scrubbing gently with a soft brush or plastic pad (not metal scouring pad) and a mildly abrasive cream cleaner. Afterwards scrub the whole area with plenty of clean water and re-polish as before.

 

How much limestone is in each bath?

PORCELITE® consists of 70% limestone for strength and natural whiteness and 30% high quality resins for stain resistance and ambient warmth.

 

Choose an PORCELITE® bath from MODA and relax – you’ve made an investment that will last a lifetime.